The MTX Series of Matrix Switches brings the latest developments in switching technology to the Cornet line of products.
Based on a single-stage, non-blocked, crosspoint architecture the MTX-L provides the reliability, availability, and fault tolerance required in today’s fast-paced workplace. The MTX-L’s matrix design enables it to switch virtually all of the available interfaces required for today’s environment. These interfaces range from low speed VF to high speed digital and video applications.
Key features
• WAN and Analog Line Switching in one chassis • Support of High Speed Interfaces • Integral SNMP proxy agent that operates under HP OpenView™ (UNIX or Windows), Netview™ 6000 or Sun NetManager™ • Hardware Setup and Control fully managed through CorScan® • Intelligent port card design: one card many interfaces and functions • Intermix interfaces, DCE/DTE types, and speeds in the same chassis • Complete Hardware Redundancy. Fault tolerant architecture with automatically switched redundant logic, power supplies, and dual power feeds • Extensive background diagnostics proactively monitor and verify the integrity of all data paths through the switch engine • Built-in Non-Volatile RAM retains connection table in the event of a power failure • Small footprint, high density design • Modular design and expansion to 1024 ports
Cornet offers a range of video encoders and decoders, from software, to rackmounted hardware through to fully ruggedised field units. Our systems support a range of MPEG-2, MPEG-4 and H.264 codecs.
The MTX-R BTS is a ruggedized non-blocking, high-speed digital matrix switch designed for shipboard applications. The Switch allows the interconnection of 512 digital or Wideband (25 kHz) analogue ports, and performs automated switching and control of clear and encrypted signals between modems, encryption devices, radio transmitters and receivers.
The Cornet Switching Systems Intelligent Protection Switches (IPS) are high bit-rate, high-bandwidth, electromechanical, 32 channel digital, analog and optical fibre A/B and A/B/C switches.
A multiservice access concentrator, the IPGate 1000-16 can reliably and securely transport legacy TDM (Time Division Multiplexing) and other circuit-based applications across converged IP networks. The IPGate 1000-16 provides the capacity to support a wide variety of analogue or digital interfaces at configurable rates from 75bps to 2.048 Mbps.
A/B Switching is normally combined with the traditional manual patching system, providing a facility to enable sparing of DTE or DCE equipment through the use of a toggle switch and electromechanical latching copper relays.
In the MTX-256, Cornet Switching Systems combines unparalleled interface and speed support with a space efficiency no other matrix switch system can rival. With its compact switching engine, the MTX-256 requires only one standard equipment rack to support 2048 ports. A fully expanded system occupies half the engine space of a traditional matrix switch.
MTX-1 is a 16-port, and the MTX-2 a 32-port high-speed, non-blocking, digital matrix switch that packs the same functionality of larger MTX series systems into a compact, space-saving chassis.
Cornet provides a complete range of video convergence products meeting the needs of miltary, transportation and commercial customers. Products include a range of encoders and decoders as well as VDOLink management softare and Analogue Video Matrix Switches.
The MTX-R RCS is a non-blocking, high-speed digital conferencing switch ruggedized for military installation and application. This conference switch connects up to 352 dual-sourced ISDN telephones (32 PRIs) to 256 crypto devices, allowing a conference call to include up to 63 parties on a single crypto device.